hth® pH increaser
- Allows your sanitizer to work most effectively
- Reduces equipment corrosion
- Reduces eye irritation
- Reduces skin dryness
- Compatible with salt water systems
How to use
hth® pH increaser
Application instructions:
1. Before adding this product to your pool, measure the pH of the water with an hth® test kit or test strips.
2. Calculate the correct amount of this product to add.
3. Broadcast this product over the deepest part of the pool.
4. Keep the circulation pump running.
5. Check pH again after 2 hours.
6. Repeat treatment if necessary.
1. Before adding this product to your pool, measure the pH of the water with an hth® test kit or test strips.
2. Calculate the correct amount of this product to add.
3. Broadcast this product over the deepest part of the pool.
4. Keep the circulation pump running.
5. Check pH again after 2 hours.
6. Repeat treatment if necessary.
Note:
Do not apply near walls and metal fixtures
Do not apply near walls and metal fixtures
Dosage rate:
1. Add 75g of this product for each 10,000L of pool water to increase pH 0.1 ppm.
2. Follow the application instructions.
1. Add 75g of this product for each 10,000L of pool water to increase pH 0.1 ppm.
2. Follow the application instructions.
Prevent pH variation or over-buffering:
1. Prevent pH Variation or Over-Buffering
2. Keep the total alkalinity between 60-120 parts per million (ppm).
3. Each month, test for total alkalinity with an hth® test kit or test strips.
4. Use hth® Alkalinity Increaser to increase the total alkalinity or hth pH decreaser to lower the total alkalinity.
5. Follow directions on those product labels.
1. Prevent pH Variation or Over-Buffering
2. Keep the total alkalinity between 60-120 parts per million (ppm).
3. Each month, test for total alkalinity with an hth® test kit or test strips.
4. Use hth® Alkalinity Increaser to increase the total alkalinity or hth pH decreaser to lower the total alkalinity.
5. Follow directions on those product labels.
